EuroFix Self-Levelling Compound
Self-smoothing floor underlayment that flows flat for fast, level interior floors
Description
A self-levelling floor compound classified EN 13813 — CT-C20-F6 that flows flat to level interior floors quickly and accurately, ready for tile, vinyl or wood. Suitable for underfloor heating at 2–10 mm thickness, it provides the flat surface essential for large-format tiles and modern finishes in reconstruction work.
Fields of Application
- Interior floors before tile, vinyl or wood
- Levelling uneven floors
- Underfloor heating systems
- Base prep for large-format tiles
- Reconstruction and modern floor finishes
Technical Properties
| Property | Value |
|---|---|
| Mixing ratio | ≈ 5.5–6 L water per 25 kg bag |
| Application thickness | 2–10 mm |
| Flow | Self-smoothing |
| Walk-on | After ≈ 4 hours |
| Compressive strength | C20 (≥ 20 MPa) |
| Flexural strength | F6 (≥ 6 MPa) |
| Underfloor heating | Suitable |
| Application temp. | +5°C to +30°C |
| Classification | EN 13813 — CT-C20-F6 |
Surface Preparation
- The substrate must be sound, clean and free of dust, oil and loose layers.
- Fill cracks and joints and seal openings to prevent the fluid compound leaking.
- Prime the floor with a suitable primer (e.g., EuroFix Primer) to prevent pinholes and ensure even flow.
- Allow the primer to dry completely before pouring.
Application Method
- Add the powder to clean water and mix with a slow drill to a homogeneous, lump-free fluid.
- Let the mix rest 2 minutes, then re-stir before pouring.
- Pour the mix onto the floor at 2–10 mm and spread with a smoother.
- Pass a spiked roller over the compound to release air and ensure self-smoothing.
- Walk-on after ≈ 4 hours; allow full drying before laying tile or flooring.
Consumption
| Use | Rate |
|---|---|
| Per mm thickness per m² | ≈ 1.6 kg/m²/mm |
| 3 mm layer | ≈ 4.8 kg/m² |
| 25 kg bag at 3 mm | ≈ 5 m² |
Comparison vs. Ordinary Site Mix
| Criterion | Ordinary Mix | EuroFix |
|---|---|---|
| Flatness | Uneven, needs correction layers | Flows flat automatically |
| Speed of work | Manual, slow, labour-intensive | Fast pour, less labour |
| Cure time | Long cure before finishing | Walk-on within ≈ 4 hours |
| Large-format readiness | Waviness prevents large tiles | Ideal flat base |
| Underfloor heating | Cracks with thermal movement | Suitable for underfloor heating |
Consumption & Cost
Compared with hand-screeding using a sand-cement mix — which is uneven, labour-intensive and slow to cure — the self-levelling compound delivers speed, flatness and less labour. It flows flat automatically and is walk-on within about 4 hours, becoming ready for tile, vinyl or wood quickly. This flatness is essential for large-format tiles and modern finishes in reconstruction, where the higher bag price turns into real savings in time, labour and finish quality.
Packaging
25 kg bag
Storage & Shelf Life
Store in original sealed bags in a dry place, raised off the ground on wooden pallets. Shelf life 12 months from the production date printed on the packaging.
Safety
Contains cement which reacts alkaline with moisture. Wear protective gloves and goggles. On eye contact, rinse with plenty of water and seek medical advice. Keep out of reach of children.