EuroFix Self-Levelling Compound

A self-levelling floor compound (CT-C20-F6) that flows flat to level interior floors quickly and accurately, ready for tile, vinyl or wood. Suitable for underfloor heating, at 2–10 mm thickness.

Special cements, fine graded quartz sand, superplasticisers and flow agents that deliver a self-smoothing, level flow.

The substrate must be sound, clean and free of dust and oil. Pre-fill cracks and joints and prime the floor with a suitable primer (e.g., EuroFix Primer) to prevent pinholes and ensure even flow.

Add the powder to about 5.5–6 L of clean water per 25 kg bag and mix with a slow drill to a homogeneous, lump-free fluid consistency. Let it rest 2 minutes, then re-stir. Do not exceed the water to preserve strength.

Pour the mix onto the floor at 2–10 mm and spread with a smoother, then pass a spiked roller over it to release air and ensure self-smoothing. Walk-on after about 4 hours; allow full drying before laying tile or flooring.

Contains cement which produces an alkaline reaction with moisture. Wear protective gloves and safety goggles. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Store in original unopened bags, in a dry place elevated from the ground on wooden pallets. Shelf life is 12 months from the production date printed on the packaging.