EuroFix Standard C1

A standard cementitious tile adhesive (C1) designed for fixing ceramic tiles and mosaics with normal water absorption (>3%) on interior and exterior concrete and cement-based walls and floors.

A homogeneous blend of high-quality Portland cement, graded quartz sand, and polymeric additives to improve workability and adhesion.

The substrate must be clean, dry, sound, and free from dust, oil, grease, and loose particles. Highly absorbent substrates like gypsum or aerated concrete must be primed with a suitable primer (e.g., EuroFix Primer) 4-6 hours prior to application.

Gradually add the adhesive powder to clean water at a ratio of 6 to 6.5 liters per 25kg bag. Mix using a low-speed electric mixer until a lump-free, homogeneous paste is obtained. Let it rest for 5 minutes, then remix.

Apply the adhesive to the substrate using the flat side of the trowel, then comb with the notched side suitable for the tile size. Press the tiles firmly into place to ensure full coverage. Remove excess adhesive before it sets.

Contains cement which produces an alkaline reaction with moisture. Wear protective gloves and safety goggles. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Store in original unopened bags, in a dry place elevated from the ground on wooden pallets. Shelf life is 12 months from the production date printed on the packaging.